$2 / month

Comment and reply across TML.

Start or manage membership

Most pulsed

Latest from other desks

tml.the modern leap
Science / Space

JAXA Retargets Hayabusa2 To Tiny Asteroid After Engine Failures

Japan's space agency said on Tuesday that Hayabusa2 will skip its planned 2031 rendezvous with asteroid 1998 KY26 and instead fly past 2015 BM510 in April 2028, after the last normally working main engine failed in August.

TML Science DeskNov 18, 7:52 AM ET · 2 min read

Edited and fact-checked by Stephen Sprague

An artist's impression of Hayabusa2 firing its ion thrusters (archive). Photo: JAXA, via Wikimedia Commons.
Summary

JAXA has not announced an exact encounter date in April 2028, and Hayabusa2 may spot its target only about 10 hours before the pass.

Tap a passage. React to the part that matters.

Hayabusa2 has been flying for almost 12 years, and on Tuesday the Japan Aerospace Exploration Agency gave the aging probe a shorter trip home. Yuya Mimasu leads the extended mission, and he told reporters 'the deterioration of the onboard equipment is becoming increasingly evident' after repeated main engine malfunctions. JAXA presented the change to a Cabinet Office space policy subcommittee on Monday, then announced it on Tuesday.

The failure that forced the decision came in mid-August, when the last of the spacecraft's four ion engines still operating normally developed a fault and the team kept flying on the remaining systems. What the probe can no longer build is the acceleration the original route needed, including a planned swing-by maneuver that would have used Earth's gravity to bend its path toward 1998 KY26. 'We decided to revise the plan to one that could be safely implemented,' Mimasu said.

Its new target is 2015 BM510, a dark D-type asteroid somewhere between 17 and 74 meters across that completes one rotation every 49 minutes. Hayabusa2 will not stop there. The plan is a pass within a few hundred meters at a relative speed of about 6 kilometers per second in April 2028, and the spacecraft may identify the asteroid only about 10 hours before closest approach. 'Because it is a dark, small asteroid, it will be one of the world's most difficult flyby missions,' Mimasu said, and no spacecraft has visited a D-type near-Earth asteroid before.

The plan it replaces was a rendezvous, with Hayabusa2 arriving at 1998 KY26 in 2031, when that asteroid would sit about 300 million kilometers from Earth, and settling in beside it. The spacecraft launched from Tanegashima Space Center on December 3, 2014, reached asteroid Ryugu in 2018 and returned its samples to Earth in 2020. In July 2026 it flew past asteroid Torifune at about 400 meters, the closest approach of the mission so far, and the team is holding most of that imagery for a November 25 press conference.

The extended mission carries its own name, Hayabusa2#, for Small Hazardous Asteroid Reconnaissance Probe, and its job was always the small and dangerous end of the asteroid population. Torifune, the July target, is a contact binary, two lobes resting against each other. A D-type body like BM510 is darker and more carbon-rich than the asteroids spacecraft have sampled, and its 49-minute spin is fast enough that a careless pass plan would smear every image the cameras take.

Mimasu said the revised flight can still serve planetary defense work, since a fast pass at a small, dark, fast-spinning rock resembles the encounter a defense mission would face on short warning. The unknowns sit inside the target's own numbers. A size estimate running from 17 to 74 meters means the asteroid's shape and mass are poorly pinned down, JAXA has announced no exact encounter date inside April 2028, and a spacecraft that has already lost its healthy engines has to stay alive another 17 months to make the pass.

Sources

The conversation

A little more perspective.

Reading is free. Verified members can comment and reply for $2 a month.

The conversation.

Loading comments…

Keep your curiosity going.

Some links here are affiliate links. If you buy through one, we might make a commission — it never changes what you pay. As an Amazon Associate I earn from qualifying purchases.