$2 / month

Comment and reply across TML.

Start or manage membership

Most pulsed

Latest from other desks

tml.the modern leap
Autos / Ownership

Daimler and Paccar Recall 4,832 Trucks Over Driveshaft

Daimler Trucks North America is recalling 3,894 model-year 2027 Freightliner and Western Star trucks and Paccar is recalling 938 Kenworths, all built with Cummins-Meritor drivelines that may be missing a snap ring in the slip yoke assembly.

TML Autos DeskNov 17, 7:27 AM ET · 2 min read

Edited and fact-checked by Stephen Sprague

A Freightliner Cascadia (archive). The Cascadia is one of seven Daimler nameplates in the recall of 3,894 model-year 2027 trucks. Photo: Oleg Yunakov, CC BY-SA 4.0, via Wikimedia Commons.
Summary

A snap ring is a small retaining clip. Missing one can separate a bearing cup from the driveline, and that is enough to pull 4,832 brand-new trucks into two federal recall campaigns.

Tap a passage. React to the part that matters.

Daimler Trucks North America and Paccar are recalling 4,832 model-year 2027 trucks because a missing snap ring can let the driveline separate.

The defect sits inside certain Cummins-Meritor drivelines. Recall documents from both manufacturers say the driveline may be missing a snap ring in the slip yoke assembly, which can let the bearing cup separate from the driveline. A separation can cause a loss of drive power, and detached components can become a road hazard for other vehicles, according to the National Highway Traffic Safety Administration documents. Every truck in both campaigns is a model-year 2027 unit.

Daimler's campaign is the larger one at 3,894 trucks. It covers the 2027 Western Star 49X and 47X and the 2027 Freightliner Cascadia Fifth Gen, Cascadia, 114SD, Business Class M2 and 108SD. Daimler's recall number is F1046, and the NHTSA campaign number is 26V-737.

Paccar's campaign covers 938 model-year 2027 Kenworth T280, T380, T680, T880 and W990 trucks built with the same driveline. Paccar's recall number is 26PACK, and the NHTSA campaign number is 26V-743.

The remedy is an inspection, not a bill. For Daimler trucks, Cummins will inspect and replace the driveline as necessary, free of charge. Kenworth dealers will do the same work free on the Paccar trucks. Owner notification letters are expected to be mailed on January 5, 2027, for the Daimler campaign and January 10, 2027, for the Paccar campaign.

A third, much smaller Daimler recall sits in the same documents. It covers seven trucks, and the defect is on paper. The Gross Axle Weight Rating on the Federal Certification Label is incorrect, which could let a truck be overloaded. Daimler found the mismatch after a dealer phone call in late October 2026, opened a case on October 30, and recalled the seven trucks on November 4. Its number is F1045, the NHTSA number is 26V-736, and the remedy is still under development.

Owners do not have to wait for the January letters. Anyone running a listed model-year 2027 truck can check the vehicle identification number against NHTSA campaigns 26V-737 and 26V-743 now. Daimler customer service is at 800-547-0712, Cummins at 800-286-6467, and Kenworth at 425-828-5888. Fleets taking delivery of 2027 trucks this quarter can run the same check before the truck enters service.

The two driveshaft campaigns are the second Cummins-component recall wave to reach late-model trucks this fall. On October 28, two Paccar recalls in one day covered nearly 27,000 Kenworth and Peterbilt trucks over a Cummins fuel hose and about 310 model-year 2027 sleepers over bunk restraints. This wave is smaller. The failure mode is not.

Sources

The conversation

A little more perspective.

Reading is free. Verified members can comment and reply for $2 a month.

The conversation.

Loading comments…

Keep your curiosity going.

Some links here are affiliate links. If you buy through one, we might make a commission — it never changes what you pay. As an Amazon Associate I earn from qualifying purchases.